CNC Programmer-

Vance, AL
Full Time
5000
Mid Level

CNC Programmer

 

PURPOSE: 

CNC Programmer is responsible for being the main point of contact in the dimensional lab for PPAP, programs, machine validations, and fixtures measurements in CNC machines by sharing dimensional reports, and adjustments needed in the different features of the products.

Part of their responsibilities is also to be the leader of the CNC technicians and train them in GD&T and drawings/reports interpretations and CNC program modifications.


RESPONSIBILITIES:

  • Monitor and analyze project schedules.
  • Write Pc-dmis / Calypso programs for part layouts and fixture certification.
  • Analyzes inspection problem by comparing part with blueprints or CAD, and revises procedures necessary to measure specified dimensions.
  • Performs CMM part checks on surface plate or positions in gauging setup to verify dimensions.
  • Analyzes defective parts to determine reasons for dimensional variations such as faulty machining, or assembly procedures, setup, tools or fixtures.
  • Monitors daily quality status with regards SPC and reports non-conformances.
  • Recommends corrective procedures to engineering and production departments.
  • Inspects machining or assembly fixtures, tools or gauges and suggests replacement or use of new equipment.
  • Approves parts not within specified dimension tolerances.
  • Interprets allowable tolerances specified on CAD.
  • Executes capability and GR&R studies.

QUALIFICATIONS:

  • Bachelor’s degree- Engineering
  • 5 years at least in CNC programming

REQUIRED SKILLS:

  • Ability to work in a team with high commitment and great flexibility
  • Enthusiasm about interdisciplinary thinking and teamwork
  • Proficiency in project scheduling software
  • Interpersonal skills and abilities to deal effectively at all levels and with corporate / external partners.
  • Sound analytical and organizational skills, structured working approach and attention to details.
  • Strong communication skills, both written and verbal.

PREFERRED SKILLS:

  • Good written and verbal communication skills.    
  • Good reasoning abilities and sound judgment.   
  • Good ability of planning, organizing, and controlling activities (multitasking)
  • Results-oriented, product focused excellent ability to work cross functionally.
  • Excellent Problem solving and debugging skills.

PHYSICAL REQUIREMENTS:

    • Work is normally performed in an office, laboratory, manufacturing floor, or machine shop setting where physical work includes, but is not limited to, sitting, standing, reaching, kneeling, bending, and lifting up to 25 lbs.
    • Must be able to understand and comply with all relevant safety practices.

 

FLSA STATUS/WORKING SCHEDULE:

    • Location: Tuscaloosa, AL
    • Assignment Start: ASAP 

DISCLAIMER:

This job description is a high-level overview of general expectations of this position. It is not intended to list every responsibility of the position, nor does it represent an employment contract of any kind.

SWJ TECHNOLOGY and all of its subsidiaries (i.e., NGE EQUIPMENT and ProjectOne US) are Equal Opportunity Employers and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender, disability status, protected veteran status, or any other characteristic protected by law.

SWJ TECHNOLOGY and all of its subsidiaries (i.e., NGE EQUIPMENT and ProjectOne US) are Equal Opportunity Employers and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender, disability status, protected veteran status, or any other characteristic protected by law.

Share

Apply for this position

Required*
Apply with Indeed
We've received your resume. Click here to update it.
Attach resume or Paste resume
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.
Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status


Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 04/30/2026
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Human Check*