Quality Engineer I

Vance, AL
Full Time
Mid Level
PURPOSE:
Enforcement and optimization of the QA management system for ensuring fulfillment.

RESPONSIBILITIES:
  • Ensuring the implementation of and compliance with the QA management system by all the affected departments Ensuring compliance with all the documentation systems; customer portals; etc
  • Reporting on the current QA situation at all times 
  • Error elimination measures and process optimization
  • Introduction and maintenance of modern measurement and evaluation systems QA
  • Preventive customer support
  • Audits
  • Ensuring a high level of supply quality by regular quality monitoring of purchased parts.
  • Ensures that the requirements of China's Implementation Rules for Compulsory Certification of Motor Vehicle Products (for interior trim parts: CNCA-C11-09:2014) are fulfilled and that the complete implementation is secured and adjusted periodically according to the given changes.
  • Ensures that CCC certified products at all times comply with the Chinese product standard (for interior trim parts: GB 8410-2006)
  • Ensures that a procedure exists that controls the labeling of the product with the CCC logo
  • Ensures that a procedure exists which controls the marking of the CCC logo and assures that it is not applied on faulty or non-certified products. The procedure must also make sure that the logo cannot be put on any products that have been modified after certification without an adjustment of the certificate.
  • Ensures that the CoP Control Plan is created and implemented
  • Ensures that any relevant changes are announced to the Chinese Certification Authority before production of marked CCC products is allowed.
Special responsibilities
  • Optimization of project related advanced quality planning activities in project phases for certain programs assigned including holistic approach for plant hand-off - Cradle to Grave management of quality activities.
  • Ensuring Quality is represented in project meeting for assigned program
  • Create, track, address and close open items related to Quality in project
  • Reporting on the current QA situation at all times during various phases
  • Organization and planning of PPAP activities for on time submissions
  • Manage all PRAM items in I-Share and report during project reviews
  • Mange all engineering change evaluations and implementations in I-Share for Quality 
  • Attend tooling trials for Quality if needed
QUALIFICATIONS:
  • Bachelor in Industrial, Mechanical, or any related Engineering degree, Economics, Business Administration or relevant work experience
  • 3+ years of experience working in the position in the Automotive Manufacturing Industry
REQUIRED SKILLS:
  • Plastics, process and coating technologies
  • Production methods (for example, Toyota Production System, Lean Manufacturing, Value Stream Mapping) 
  • Quality management systems, automotive
  • Measuring room technology, laboratory methods
  • Management techniques
  • PPAP
  • IT Knowledge (Office, SAP)
PHYSICAL REQUIREMENTS:
  • Work is normally performed in an office, laboratory, manufacturing floor, or machine shop setting where physical work includes, but is not limited to, sitting, standing, reaching, kneeling, bending, and lifting up to 25 lbs.
  • Must be able to understand and comply with all relevant safety practices.
FLSA STATUS/WORKING SCHEDULE:
  • Location: Vance, AL
  • Schedule: Day shift and Night shift
  • Assignment Start: ASAP

DISCLAIMER:
This job description is a high-level overview of general expectations of this position. It is not intended to list every responsibility of the position nor does it represent an employment contract of any kind.

 

SWJ TECHNOLOGY and all of its subsidiaries (i.e., NGE EQUIPMENT and ProjectOne US) are Equal Opportunity Employers and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender, disability status, protected veteran status, or any other characteristic protected by law.

Share

Apply for this position

Required*
Apply with Indeed
We've received your resume. Click here to update it.
Attach resume or Paste resume
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.
Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status


Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 04/30/2026
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Human Check*