BAS-Engineer – Building Automation & Utilities

Blythewood, SC
Full Time
Experienced
SWJ Technologie specializes in providing engineering, planning, and project management services across various industries. We are currently seeking a BAS Engineer – Building Automation & Utilities a client in the automotive industry, specializing in car manufacturing. This role is a contractor to direct hire position based in Blythewood, SC that requires onsite presence.  If you’re eager to grow your career and make a meaningful impact on exciting projects, we look forward to your application.
 
PURPOSE: 
This position is responsible for the engineering, programming, integration, troubleshooting, and continuous improvement of Building Automation Systems (BAS) supporting critical facility and utility systems. The role focuses on Ignition for monitoring, control, alarms, data collection, dashboards, trending, and system integration.
The position supports systems including electrical power, chilled and hot water, compressed air, HVAC, pumps, boilers, cooling towers, and utility monitoring while working closely with engineering, maintenance, IT/OT, contractors, and suppliers.

RESPONSIBILITIES:
  • Develop, configure, maintain, and troubleshoot BAS applications using Ignition.
  • Develop SCADA screens, dashboards, alarms, trends, reports, and historical data solutions.
  • Configure tags, UDTs, alarm systems, historians, gateways, and user access.
  • Integrate PLCs, meters, sensors, and controllers using OPC UA, Modbus, Ethernet/IP, BACnet, MQTT, and related protocols.
  • Troubleshoot BAS, PLC, HMI, instrumentation, and industrial network issues.
  • Support automation and monitoring of electrical power, chilled/hot water, compressed air, HVAC, and other utility systems.
  • Develop and optimize control strategies, equipment sequencing, alarms, and utility performance.
  • Collaborate with Controls and IT/OT teams on system architecture, networking, cybersecurity, servers, backups, and access control.
  • Coordinate technical requirements with contractors, suppliers, OEMs, and system integrators.
  • Support commissioning, startup, FAT/SAT, point-to-point checks, functional testing, and system handover.
  • Analyze utility data to identify opportunities for energy efficiency, predictive maintenance, and equipment optimization.
  • Maintain BAS documentation including architecture, I/O and point lists, control narratives, alarm matrices, network diagrams, and backup procedures.
  • Support continuous improvement and reliability projects related to facility automation and utilities.
QUALIFICATIONS:
  • Bachelor’s degree in Electrical, Controls, Automation, Mechanical, Computer Engineering, or a related field.
  • 3–7+ years of experience in BAS, SCADA, controls, automation, facilities engineering, or industrial utilities.
  • Hands-on experience with Ignition strongly preferred.
  • Experience of working with industrial equipment, controls systems, suppliers, contractors, or system integrators.
  • Ability to read electrical schematics, P&IDs, control drawings, and network diagrams.
REQUIRED SKILLS:
  • Strong BAS/SCADA and Ignition knowledge.
  • Experience with OPC UA, Modbus, Ethernet/IP, BACnet, and MQTT.
  • Understanding of PLC-based control systems and industrial automation.
  • Knowledge of electrical power distribution and utility systems.
  • Understanding of chilled water, hot water, compressed air, HVAC, and related systems.
  • Strong troubleshooting skills across controls, instrumentation, BAS, PLCs, and industrial networks.
  • Knowledge of IT/OT infrastructure and industrial cybersecurity.
  • Strong analytical, communication, commissioning, and problem-solving skills.
  • Ability to work hands-on in a manufacturing environment.
PREFERRED SKILLS:
  • Ignition certification or advanced hands-on Ignition experience.
  • Experience with Ignition Perspective/Vision.
  • Python scripting and SQL/database experience.
  • Experience with Rockwell/Allen-Bradley, Siemens, Mitsubishi, or Schneider PLCs.
  • Industrial Ethernet and managed switch experience.
  • Automotive or other high-volume manufacturing experience.
  • Knowledge of HVAC/BMS, energy-management systems, or CMMS.
  • Knowledge of ISA-95 / ISA-62443 and industrial cybersecurity.
  • Experience with high-availability SCADA/BAS architectures.

PHYSICAL REQUIREMENTS:
  • Work is normally performed in an office, laboratory, manufacturing floor, or machine shop setting where physical work includes, but is not limited to sitting, standing, reaching, kneeling, bending, and lifting up to 25 lbs.
  • Must be able to understand and comply with all relevant safety practices.
FLSA STATUS/WORKING SCHEDULE:
  • Location: Blythewood, SC
  • Schedule: Day shift, 40h/w, weekend as required
  • Overtime: as required
  • Duration: 6 months contract with the option to extend or to be hired directly
  • Assignment Start: ASAP
DISCLAIMER:
This job description is a high-level overview of general expectations of this position. It is not intended to list every responsibility of the position, nor does it represent an employment contract of any kind.

 

SWJ TECHNOLOGY and all of its subsidiaries (i.e., SWJ MACHINING and ProjectOne US) are Equal Opportunity Employers and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender, disability status, protected veteran status, or any other characteristic protected by law.

Share

Apply for this position

Required*
We've received your resume. Click here to update it.
Attach resume or Paste resume
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.
Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status


Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 05/31/2026
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Human Check*